Output Idfault - Xerox DocuPrint 100 Software Manual

Table 4-56. OUTPUT GRAPHICS parameter options and definitions (Continued)
Option
Unused options: The following options are ignored by the DP EPS. They are included here
for compatibility.
MOVE
NOSUB
Default
OUTPUT
GRAPHICS
parameter: points
to note
OUTPUT
GRAPHICS
parameter
examples
Syntax
Using LCDS Print Description Language
Definition
Specifies that all referenced graphic disk files will be copied into the print file.
(On the DP EPS, YES is used instead.)
If a graphic is missing, specifies that no substitution for the missing graphic
image is desired. (This option is ignored by the DP EPS.)
NO
• If you are using the IMAGE parameter in conjunction with
GRAPHICS, make sure to list the GRAPHICS parameter first,
as these two parameters are order dependent.
• In Batch mode, only one graphic is imaged per page.
• After a graphic has been processed as part of the job, if a
switch to a JDE with GRAPHICS = NO occurs, the
GRAPHICS = NO specification is ignored.
OUTPUT GRAPHICS=BATCH, RESOLUTION=300;
OUTPUT GRAPHICS=MOVE, RESOLUTION=300,
PURGE=NO;

OUTPUT IDFAULT

Specifies the default ink that will be used for objects whose ink is
not specified. This parameter remains in effect until another
IDFAULT parameter is specified.
OUTPUT IDFAULT = 'inkref''
Specifying print format parameters
4-57