Output Cover; Output Cycleforms - Xerox DocuPrint 100 Software Manual

Syntax
Options
Table 4-47. OUTPUT COVER parameter options and definitions
Option
NONE
FRONT
SEP
BACK
BOTH
Default

OUTPUT COVER

parameter: point
to note
Syntax
Using LCDS Print Description Language
OUTPUT COVER
Specifies that cover sheets are to be fed from the AUX stock.
These cover sheets may be placed at the front or back of each
copy of a report.
OUTPUT COVER = {(FRONT [, SEP]) | BACK | (BOTH [, SEP]) |
NONE}
Definition
Specifies that no cover sheets are to be fed.
Specifies that a cover sheet will be fed as the first page of each report copy.
Specifies that no data will be printed on any front cover sheet.
Specifies that a cover page will be fed at the end of each copy. No report data is
printed on back covers.
Specifies that both front and back cover pages will be fed for each report copy.
The front cover sheet will be the first page of each copy.
NONE
If RTEXT is specified along with (FRONT, SEP) or (BOTH, SEP),
RTEXT pages are printed on the covers, and front covers are
picked only on copies for which there is RTEXT. (Refer to the
ROUTE RTEXT parameter description later in this chapter, for
further details on RTEXT.)
Refer to "Restrictions on job parameter modification" for more
information on COVER specified in a selected JDE.

OUTPUT CYCLEFORMS

Specifies a set of forms to be printed on report pages in a
repeating sequence.
OUTPUT CYCLEFORMS = {NONE | formid | (formid
inkref [inkref ]] [, ...])] [, formid
1 2
Specifying print format parameters
[, (INKS, inkref [inkref
2 1
[, (INKS,
1
] [, ...])])}
2
4-49