Output Binding - Xerox DocuPrint 100 Software Manual

Table 4-43. BFORM parameter options and definitions (Continued)
Option
inkref
Default
Syntax
Options
Table 4-44. OUTPUT BINDING parameter options and definitions
Option
LONG
SHORT
Default

OUTPUT BINDING

parameter: point
to note
Using LCDS Print Description Language
Definition
Ink reference.
Identifies the inks that override the corresponding inks that are specified in the
ink list of the form. If a form does not contain an ink list, the form is printed in
black.
NONE
OUTPUT BINDING
Specifies printing for long edge or short edge binding. Causes
the page to be rotated to orient it correctly for binding by a
finishing device on the long or short edge.
OUTPUT BINDING = {LONG | SHORT}
Definition
Rotates the sheet so that binding space will occur along the long edge of the
printed page.
Rotates the sheet so that binding space will occur along the short edge of the
printed page.
LONG
The following figure shows the output using two-hole drilled long
edge feed paper with short edge binding.
Specifying print format parameters
4-45