Introduction; Contents - Xerox DocuPrint 100 Software Manual

Contents

Focus of this
guide
Using LCDS Print Description Language

Introduction

Using LCDS Print Description Language provides information on
how to use PDL to program LCDS job descriptions that can be
used on the Xerox DocuPrint 75/90 and 100/115/135/155/180
Enterprise Printing Systems, the DocuPrint 75 MX, and other
Xerox laser printing systems.
Before using this documentation, become familiar with its
contents and conventions.
The topics discussed in this guide include:
• Explanation of a Job Source Library (JSL), including required
and optional commands and components
• Rules and guidelines for coding LCDS PDL commands
• Procedures for creating and compiling a JSL
• Syntax and explanation of each LCDS PDL command,
parameter, and DJDE
• Explanation of Dynamic Job Descriptor Entries (DJDEs) and
the process for inserting them into the data stream
• Reference list of all PDL and DJDE commands, including
online and offline usage, parameters, and the Xerox printing
systems that support them
A glossary and index are also provided.
This documentation describes LCDS Print Description Language
as it applies to the DocuPrint 100/115/135/155/180 and 75/90
EPS, and DocuPrint 75 MX. Except where otherwise noted, the
PDL information contained in this documentation also applies to
the following families of Xerox Laser Printing Systems that print
LCDS data:
Xerox 180, 180MX, 96, and 96MX Laser Printing Systems
xxiii