Syntax
Options
Table 5-9. BATCH DJDE options and definitions
Option
START
END
BEGIN DJDE
Type
Syntax
Using LCDS Print Description Language
Using Dynamic Job Descriptor Entries (DJDEs)
BATCH = {START | END}
Definition
Marks the beginning of online Batch mode data.
Marks the end of online Batch mode data.
BATCH DJDE: points to note
•
The BATCH DJDE is supported for online Batch mode jobs
only.
•
This DJDE must be used precisely to mark the beginning and
ending of online Batch mode data.
– The first graphic (or IMAGE DJDE) must be preceded
immediately by a BATCH=START DJDE.
– The last graphic must be followed immediately by a
BATCH=END DJDE.
•
The BATCH DJDE, when specified, must be the only DJDE in
the packet.
Specifies the location of the starting print line of a logical page.
Page oriented
BEGIN = (vpos [units], hpos [units])
5-17