Walkup Screen
To change the default display
for the Touch Screen:
À
Select [Walkup Screen].
À
Select the preferred default
screen
À
Select [Save].
The screen selected will be
displayed when the machine is
switched ON , when
programming or job time-out
occurs, or when Clear All is
selected.
Timers
Xerox Document Centre 440/432/420 User Guide
NOTE: The buttons available will depend on the machine
configuration.
À
Select [Timers].
À
Select any button to change the setting - a description of
each follows.
À
Make changes as required.
À
Select [Save] to continue.
Auto Clear
With the Auto Clear feature enabled, the machine returns to the
default settings after the specified time.
Page 10-11