Table of Contents
Advertisement
Foreign Interface Device
Quick Pathway
À
Select [Access]
on the Control Panel
À
Select [#] button on the
Control Panel
À
Enter Auditron
Administrator PIN -
see NOTE
À
Select [Auditron
Setups]
À
Select [External
Control Device]
Per-Page Control
Page 10-84
A Foreign Interface Device might be a coin-operated device, a
bill acceptor, a card reader, or a network controlled tracking
system installed on the system. The device must initially be
enabled by the Xerox representative.
This device controls only Copier print services and has no
bearing on the Fax services.
À
Access Auditron Setups . Refer to "Access Auditron Setups"
on page 10-68 for more information.
À
Select [External Control Device]. Make selections as
required - a description of each follows.
NOTE: The default password is #22222 which may be used if
PINs have not yet been assigned.
Off
to specify that a Foreign Interface Device is not connected.
to set the device for tracking each page in each job separately.
For example, for a coin-operated device, set External Auditron
to Per-Page Control. Otherwise, more than the current page
will be printed, even though only one coin was inserted.
Xerox Document Centre 440/432/420 User Guide
Advertisement
Table of Contents
