Safety Notes - Xerox Document Centre 420 User Manual

Safety Notes

Xerox Document Centre 440/432/420 User Guide
Your Xerox product and supplies have been designed and
tested to meet strict safety requirements. These include safety
agency approval, and compliance to established
environmental standards. Please read the following
instructions carefully before operating the product and refer to
them as needed to ensure the continued safe operation of your
product.
The safety testing and performance of this product have
been verified using Xerox materials only.
Follow all warnings and instructions marked on, or supplied
with the product.
This WARNING Mark alerts users to the possibility of
personal damage.
This WARNING Mark alerts users to heated surfaces.
WARNING: This product must be connected to a
protective earthing circuit.
This product is equipped with a 3-wire type plug, provided
with a protective earthing pin. This plug will fit only into an
earthed power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the
receptacle if you are unable to insert the plug into the outlet.
Never use an earthed adapter plug to connect the product to a
power source receptacle that lacks an earth connection
terminal.
This product should be operated from the type of power
source indicated on the marking label. If you are not sure of the
type of power available, consult your local power company.
Do not allow anything to rest on the power cord. Do not locate
the product where persons will step or trip on the cord.
Page 1-7