Xerox Document Centre 420 User Manual page 221

Xerox document centre 420: user guide
Hide thumbs Also See for Document Centre 420:
Table of Contents

Advertisement

Services
Xerox Document Centre 440/432/420 User Guide
Parameters
Reduce/Enlarge
Edge/Border Erase
Description
Sets reduction or enlargement.
Selections are:
Auto - automatically computes the
proper size of the scaled image so
that it can fit within the output
document dimensions without
cropping.
Normal - enables the Scale
Preserving Aspect Ratio field which
enables reduction or enlargement
of an image proportionately. Type
the percent (50 - 200) required to
reduce or enlarge the image.
Custom - enables the Scale
Without Preserving Aspect Ratio
field which enables reduction or
enlargement of an image
disproportionately. Type the percent
(50 - 200) you wish to reduce or
enlarge the image.
Choose this setting to erase the
spots, punch holes, staple marks,
folds, or any other dark lines which
may appear around the edge of an
original document. You can erase
marks which appear in the outer 0
to 15 mm of the page.
Selections are:
Off - no marks will be erased.
Border Erase - enables you to
erase equal amounts of area on
each side of a page.
Edge Erase - enables you to erase
disproportionate areas on each side
of a page.
Page 8-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Document centre 440Document centre 432

Table of Contents