Table of Contents
Advertisement
Print Setups
Quick Pathway
À
Select [Access]
on the Control Panel
À
Select [#] button on the
Control Panel.
À
Enter the System
Administrator PIN .
À
Select [Print Setups].
À
Select [Printer Setups] on
the Print Setups screen.
À
Select the option required
and modify the features.
Refer to the list below for an
explanation of each option.
À
Select [Save] to save the
changes made or [Cancel] to
leave the setting with its
original selection.
À
Select [Close] to exit.
Xerox Document Centre 440/432/420 User Guide
The Print Setups options are set up by the System
Administrator. These setups and defaults are relevant to the
DC440/432/420 as a fully networked printer.
NOTE: Refer to the DC440/432/420 System Administration
Guide for more information.
Port Setups
set up the required port on the system. Ethernet, Parallel Port
or Token Ring are the available options.
Page 10-93
Advertisement
Table of Contents
