Table of Contents
Advertisement
Stand-by Mode
Prior to entering Low Power or Power Save (Auto Off/Sleep),
the machine is in Stand-by Mode whenever it is not copying/
printing a job. The touch screen is visible and ready to be
programmed.
Low Power Mode
As delivered, the machine automatically switches into Low
Power Mode 15 minutes after the last copy/print out. In this
mode, the touch screen is blank and the Power Save light is on.
To activate the machine, touch the touch screen or any button
on the control panel or lift the platen glass cover. Should a fax
or print job be received by the machine, automatic activation
occurs. The machine responds within one second and all the
features are available within 30 seconds.
The factory default setting of 15 minutes is customer
changeable within the range of 5 to 240 minutes. For more
information refer to "Changing the Default Time Settings for
Low Power and Power Save (Auto Off/Sleep) Modes" on page
2-11.
Power Save (Auto Off/Sleep) Mode
As delivered, the machine automatically switches into Power
Save (Auto Off/Sleep) Mode, 60 minutes after the last copy/
print out. In this mode the copier version of the DC 420
switches the Power ON/OFF switch to the off position. Any
stored jobs remain in the memory and the DC 420 returns to an
operational condition when powered ON.
In Power Save (Auto Off/Sleep) Mode on the copier/printer/fax
version of the DC 420 and all DC 440/432 configurations, the
touch screen is blank and the Power Save light is lit. To re-
activate the machine, touch the touch screen or any button on
the control panel or lift the platen glass cover. Should a fax or
print job be received by the machine automatic activation
occurs.
Page 2-10
Xerox Document Centre 440/432/420 User Guide
Advertisement
Table of Contents
