Sides Imaged - Xerox Document Centre 420 User Manual

Xerox document centre 420: user guide
Hide thumbs Also See for Document Centre 420:
Table of Contents

Advertisement

À
With the documents face up,
slide the corner to be stapled
in to the stapler.
À
The stapler will automatically
staple the documents.
• During stapling the
indicator light on the left
hand side of the stapler will
be lit.
À
Remove the stapled set from
the Convenience Stapler.

Sides Imaged

Xerox Document Centre 440/432/420 User Guide
Convenience Stapler (optional)
The Convenience Stapler is an optional extra and can be
installed if the Convenience Shelf is fitted. It attaches to the
right hand corner at the rear of the shelf and is positioned so
that documents can be stapled straight or at an angle.
The Convenience Stapler can staple sets of 2 to 50 sheets of
20lb (substance 20) paper. The staple cartridge holds 5000
staples.
Up to 50 double-sided copies, ranging in size from 8 1/2" x 5 5
1/2" through 11 x 17" can be made automatically from one or
two-sided documents. On the DC420 the Document Feeder
and Duplex Module are required to produce double sided
output.
• 1
1: single-sided copies from single-sided documents.
• 1
2: double-sided copies from single-sided documents.
• 2
2: double-sided copies from double-sided
documents.
Page 3-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Document centre 440Document centre 432

Table of Contents