Table of Contents
Advertisement
Image Options tab
use to select a negative image, mirror image, or bitmap
smoothing for a document. This feature can also be used to
adjust the brightness, contrast, resolution, and magnification.
Use Auto Duplex for automatic rotation to take place on
double-sided jobs being printed onto hole-punched paper.
Draft Mode printing enables the document to be printed in a
reduced quality mode, which uses less dry ink.
Graphics mode
selects specific options when printing graphics, for example
raster or vector.
PostScript tab
use this screen to select the postscript output options and to
compress Bitmaps, which saves memory and enables faster
printing.
General tab
prints a test page.
Details tab
use to send print to a new port or a new network path, update
or change print drivers and select time-out settings.
Capture Settings tab
enables selection of Capture Print Port, Form and Job (for
example banner, copies) . Use to map or remove the mapping
to the network drive, change page dimensions and select a
banner page, number of copies etc.
Page 7-4
Xerox Document Centre 440/432/420 User Guide
Advertisement
Table of Contents
