Table of Contents
Advertisement
À
Before placing the
documents into the document
feeder, remove all staples
and paper clips.
À
Insert the documents neatly
into the document feeder,
face up. The first page should
be on top with the headings
towards the back or left of the
machine.
À
Align the stack with the left
and rear edges of the
document feeder tray and
position the guide to just
touch the edge of the
documents.
À
Check the green light on the
top rear of the document
feeder. When the documents
are positioned correctly, it will
light up.
Xerox Document Centre 440/432/420 User Guide
Light
When Auto Paper is selected, the document feeder senses the
size and orientation of the documents, then checks the paper
trays to find one that corresponds. The size and orientation are
displayed in the message area in the upper left hand corner of
the touch screen.
NOTE: Auto Paper is used with standard document sizes. For
non-standard sizes, manually select the paper tray required.
Document Glass
The document glass should be used for single pages or bound
originals up to a maximum of 11 x 17" size.
Document Feeder Guide
Page 3-3
Advertisement
Table of Contents
