Dial The Number; Select Start - Xerox Document Centre 420 User Manual

3. Dial the number

À
Using the numeric keypad,
enter the fax number.
If a character is normally
before the telephone number,
for example 9 for an outside
line, a pause will need to be
entered after this character -
select [Dial Pause] on the
control panel before continuing
to enter the fax number.
NOTE: Dial Pause is displayed
as a dash. When using manual
dialling, the Dial Pause
character is not required;
instead wait for the outside line
dial tone before proceeding.

4. Select Start

À
Select [Start] .
The Fax Job Monitor pop-up
window will be displayed. This
shows information about the fax
job.
The Document Centre scans
the images and places them in
its memory.
Xerox Document Centre 440/432/420 User Guide
dialed
Dial Pause button
Page 4-5