Table of Contents
Advertisement
À
Following the copier labels,
load the paper neatly into the
bypass tray ensuring that the
paper stack is registered to
the front right hand corner.
Take care not to fill the tray
above the fill line.
À
Slide the rear guide towards
the paper until it is just
touching the edge of the
stack.
NOTE: If loading a different
paper type or color, reprogram
the features as required in
Change Attributes .
Xerox Document Centre 440/432/420 User Guide
Bypass Tray with the Left Tray
Page 9-7
Advertisement
Table of Contents
