Table of Contents
Advertisement
The touch screen does not display the
Finisher/Stapler option
The machine does not accept documents
into memory
The machine displays a memory full error
message
The machine did not enlarge an 8 1/2" x
11" document on to an 11" x 17" page
Deformed transparencies
Annotation did not work
Xerox Document Centre 440/432/420 User Guide
Symptom
Recommendation
À
Slide the Finisher into its correct
position. The Document Centre
configures itself when additional options
are attached.
À
Check with the Key Operator about the
available memory capacity. If the
memory is almost full, print and delete
unnecessary files.
À
Check with the Key Operator about
available memory.
À
Divide the remaining pages of the job
into several small jobs and run the job
again.
À
11" x 17" paper can only be loaded in the
trays short edge feed. Load the 8 1/2" x
11" document short edge feed. The
machine cannot rotate an image on 11" x
17" paper. It only rotates images on to 8
1/2" x 11" long edge feed paper.
À
Select a percentage for enlargement.
À
Check to see if Transparencies is
selected on the touch screen. The
machine automatically adjusts for
different types of media. Paper can
tolerate more heat than transparencies.
À
Use the Left Tray instead of the Center
Tray.
À
Check features programmed. Annotation
cannot be used with N Up ( 2 Up on the
DC420 ), Booklet Creation, Gray Scale
Copying (DC420), Build Job, uncollated
copies, custom size documents, or
Bound Documents . Re-program the job.
Page 12-5
Advertisement
Table of Contents
