Table of Contents
Advertisement
Owner Tools
Access Rights
Changing the Settings
À
Select [Access]
the Control Panel.
À
A pop-up window will be
displayed on the Touch
Screen.
À
Select [#] on the Control
Panel and use the number
keypad to enter the default
password - 22222.
À
Select [Enter] in the pop-up
window.
Page 10-4
If a PIN is entered that has been assigned 'Owner' access
rights, the user can set up or change:
the allocation of Key Operator, System Administrator, Auditron
Administrator ( DC440/432 ) and Owner Access Rights.
Refer to "Access Rights" on page 10-86 for further information.
Access the Setup Tools
When the DC440/432/420 is delivered, it contains a default
password (#22222) which can be used to provide access to the
Setup Tools prior to PINs and Access Rights being assigned.
To change the default password contact the Xerox Service
representative.
on
Xerox Document Centre 440/432/420 User Guide
Advertisement
Table of Contents
