Copy Setups; Access The Copy Setups - Xerox Document Centre 420 User Manual

Copy Setups

Quick Pathway
À
Select [Access]
on the Control Panel
À
Enter Key Operator
PIN - see NOTE
À
Select [Copy Setups] .

Access the Copy Setups

À
Select [Access]
the Control Panel.
A pop-up window will be
displayed on the Touch Screen.
À
Select [#] on the Control
Panel and use the number
keypad to enter a Key
Operator PIN.
À
Select [Enter] in the pop-up
window.
Xerox Document Centre 440/432/420 User Guide
Refer to the following pages for the procedures for Copy
Setups, which includes programming the default settings for
the following features:
Reduce/Enlarge - page 10-30
Image Quality - page 10-32
Output - page 10-33
Sides Imaged - page 10-33
Expert Image Quality - page 10-35
Margin Shift (DC440/432) - page 10-35
Erase (DC440/432) - page 10-36
NOTE: These changes can only be made when a PIN
(Personal Identification Number) which has been assigned
Key Operator access rights is entered. The default password
is #22222 which may be used if PINs have not yet been
assigned.
on
Page 10-29