Table of Contents
Advertisement
Ordering Your ISDN Line
If you do not have the ISDN line installed already, we suggest that
you order it from your telephone company as soon as possible to
avoid the long waits common when ordering a new line. Use the
information in this section to place the order (see Chapter 16 for
information on provisioning your ISDN line). If you have already
installed your ISDN line, you can check the following section to
make sure that you can use all the features of your Prestige.
1. Contact your local telephone company's ISDN Ordering
Center.
2. Find out what type of ISDN service is available. Refer to
Chapter 16 to find out the provisioning information for the
appropriate switch type and ISDN service. For the U.S., the
Prestige (both U and S/T Interface) have been approved by
Bellcore and have IOC (ISDN Ordering Code) "S" Capability,
EZ-ISDN 1.
3. Provide your telephone company with the proper provisioning
information.
4. When the telephone company installs your ISDN line, be sure
to obtain the following information:
ISDN switch type.
ISDN telephone number(s).
ISDN Service Profile Identifiers (SPID) number(s) (only for
North America).
Collecting General Setup Information
The Prestige requires the following system information. You can
obtain all the pertinent information from your network
administrator. Record this information into the worksheet as it
becomes available. This worksheet will later be referred to as you
configure your Prestige.
Before You Begin 11
Advertisement
Table of Contents
