Printing From An Ftp Client; Unix Printing; Configuring The Ip Address On The Network Interface Board - Ricoh fax3310l Basic Features

7.6 UNIX Printing

2. Enter the command:
where dest-srvr-addr is the IP address of the print server to which you want to
send the print job.
Run Netscape.
3.
Choose File -> Upload File and specify the file, or drag and drop the file to your
4.
browser window and click OK.
FTP printing does not support selecting multiple file names. Only one user can be
Note:
logged on to a port at any particular time.

7.5.2 Printing from an FTP Client

Open a DOS Command window and enter the following command:
1.
where dest-srvr-addr is the IP address of the print server to which you want to
send the print job.
2. Specify
Enter the following FTP command:
3.
where filename is the file you want to print.
7.6 UNIX Printing
The Network Interface Board can support UNIX TCP/IP printing in the following mode:
• Printer-based
daemon
In general, printer-based
in the
printcap
7.6.1 Configuring the IP Address on the Network Interface
Board
The Network Interface Board must be given IP address and routing parameters. You can
configure the IP address for the Network Interface Board in one of the following ways:
• Use MAP, as described in Chapter 3
7-8
ftp://PORT1@dest-srvr-addr
ftp dest-srvr-addr
as the login.
PORT1
put filename
where the printer appears as a host running a line printer
lpd
is easiest to use on BSD UNIX systems, requiring an entry
lpd
file once the Network Interface Board has its IP information.
TCP/IP Configuration