Structure of this manual
•
Chapter 1, Introduction, contains information about the Network Interface Board, its
features, and the hardware and NOS requirements.
•
Chapter 2, Installing the Network Interface Board, explains how to install the card.
Chapter 3, Monitoring the Network Interface Board, explains how to use the Management
•
Access Program (MAP) or a Web browser to configure and monitor the Network Interface
Board.
•
Chapters 4 through 7 explain how to configure the Network Interface Board for specific
environments.
•
Chapter 8, Operation and Troubleshooting, contains information on the LED status
indicators, printing status reports, and resetting the print server to factory defaults. It also
contains troubleshooting checklists.
•
Appendix A, Jumper Settings, describes the jumper settings and locations.
•
Appendix B, Network Interface Board Specifications, lists the general specifications for
the Network Interface Board, including the specifications for the 10/100BaseT cables.