Starting The Machine; Turning On The Power; Turning Off The Power - Ricoh fax3310l Basic Features

Starting the Machine

To start the machine, turn on the
power switch.
Note
❒ This machine automatically enters
Energy Saver mode if you do not
use the machine for a while.

Turning On the Power

A A A A
Confirm that the power cord is
plugged into the outlet firmly.
B B B B
Turn on the power switch.

Turning Off the Power

Important
❒ Make sure that 100% is shown on
the Fax standby display before you
turn off the power switch or you
unplug the power cord. Fax files
programed in memory will be de-
leted 12 hours or more after you
turn off the power switch or you
unplug the power cord. The stor-
age time might be shorter if the
surrounding temperature is low or
the machine has been on for less
than a week.
❒ Fax files programmed in memory
will not be deleted while the op-
tional memory card is installed.
When you install the memory card
to the machine, make sure that
100% is shown on the display and
turn off the power switch.
A A A A
Turn off the power switch.
Starting the Machine
17
1