Ricoh fax3310l Basic Features page 306

Troubleshooting
Messages/Second messages
Print Overrun
Job Incomplete
3
Processing...
Ready
Resetting Job...
Toner is Almost Empty
Waiting...
Warming Up...
20
Description
A print overrun occurred on a
file being printed. Only a part
of the data on the page will be
printed, and the print job is
suspended, or the current
print job has been canceled.
The printer is processing in-
ternally.
The printer is online and
ready to print.
The print job is being reset.
Toner is almost running out.
The printer is waiting for the
next print job.
The printer is warming up or
toner is being supplied.
Solution
To print the image correctly,
add memory to the printer or
simplify the actual data size.
Set "Page Protect" to "On" on
the printer driver. Be sure to
return "Page Protect" to "Au-
to" after the print job. With
"Page Protect" "On", the print-
er performance might be de-
creased. While using the
PostScript printer driver, low-
er the resolution setting.
Wait for a while.
If you want to set the printer
offline, press { { { { Online} } } } .
Wait for a while.
Replace the toner early to pre-
vent poor print quality.
Wait for a while.
Wait until the panel display
changes to "Ready".