Selecting The Printer Port; Deleting The Port - Ricoh fax3310l Basic Features

Selecting the Printer Port

The IP Peer-to- Peer printing software should be installed on each Windows NT
4.0 PC that uses Peer-to-peer printing services.
Important
❒ The IP Peer-to-Peer printing software must be installed before selecting the
printer port.
A
Close all the applications that are currently running.
B
Insert the CD-ROM labeled "Printer Drivers and Utilities" into the CD-
ROM drive.
If the setup menu starts automatically, you can go to the next step. If not, see
"Installing the PCL 6/5e Printer Driver" in "Printer Reference 1" to start the in-
stallation and then go to the next step.
C
The [Printer Installation] dialog box appears.
D
From the [Port] list, select the IP address of the printer you want to set up,
and click [Next >].
E
Follow the instructions on the screen to finish the installation of the printer
driver.

Deleting the Port

The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as "FILE", then delete it. For more information about IP Peer-to-Peer, see the
"Owner's Manual".
A
Click [Start] on the taskbar, point to [Programs], and then click [IP-P2P].
The [IP-Peer to Peer Setup] window appears.
B
Click [Printers...].
C
Click [Find Printers].
Available printers appear.
D
Click to select the port you want to delete from "Unit Name" list.
E
Click [Delete].
Using IP Peer-to-Peer
27
4