Ricoh fax3310l Basic Features page 417

Ricoh fax3310l: user guide
Table of Contents

Advertisement

The default name is the Network Interface Board serial number (six digits with a
three-letter prefix). This is also the default name of the printer in peer-to-peer
mode.
If you make any changes, you will be prompted for a password. The default password
Note:
is sysadm.
Optionally, to secure the Network Interface Board with a password, enter a
5.
password in the Print Server Password field and again in the Password Retype
field.
If you are using a password, use the same password for all bindery-based and
NDS-based Print Server entries.
If you enter a password, you must also enter the same password in the password
field on your file server setup using PCCONSOLE or NWADMIN.
6.
For Bindery emulation, enter the name of a preferred bindery-based file server in
the Preferred File Server field.
The Preferred File Server entry applies only for Bindery- or Bindery Emulation-
based operations. See Section 4.1.9 Setting Up Preferred File Servers for the
significance of a Preferred File Server. The Print Server must be configured on the
preferred file server. Incorrect setup of a Preferred File Server can interfere with
NetWare printing.
7.
If the Print Server operates under Novell Directory Services, enter a Context and
Preferred NDS Tree in the appropriate fields.
Be sure to give the whole context, whether typed or typeless, and do not begin
your context path with a leading period.
An example of a typed context name is
(If you do not know your tree, open a DOS command box and enter the
command.)
An example of a typeless context name is
You must use a typeless context if the Network Interface Board is on the same
network segment as the file server.
8.
Enter the time intervals, in seconds, in which the Print Server will scan the queues
that it services in the Print Queue Scan Rate field.
The default scan rate is once per second.
9.
If your network uses multiple frame types for Novell, you can bias the frame
search to the desired type by setting the radio button next to the designation under
Ethernet Frame Type.
NetWare Configuration
4.4 Configuring the Network Interface Board
ou=standard.ou=organization_1
organization_1
.
whoami
.
4-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3310lLf310F91033725

Table of Contents