Manually Adding Printers For Ip Peer-To-Peer Printing - Ricoh fax3310l Basic Features

Field or Button
Add
Delete
Find Printers
Clear
Select
Permanent

5.2.4 Manually Adding Printers for IP Peer-to-Peer Printing

You can add printers manually whenever the program cannot find printers automatically
because of the router setup or hop count setting. In general, this should not be necessary.
Using IP-P2P to Add Printers to the port list:
1. Choose Start -> IP-P2P -> IP-P2P.
The IP Peer-to-Peer Setup screen appears.
2. Click Printers.
3. Enter information for the printer in all the following fields:
— IP Address
Enter the IP address of the printer you want to add.
Windows Peer-to-Peer Printing
Lets you manually add a printer to the Available Printers list by
entering information in the fields to the left of the button. This
bypasses the Find Printers function. The port is not checked to
see if it is actually available on the network.
Deletes the highlighted printers from the Available Printers
list. Printers deleted this way no longer appear in the Windows
Port List. However, the printer is not actually deleted from the
network — it is only removed from the list. You can put the
printer back on the list by clicking Find Printers so long as
the printer is still connected to the network.
Searches the network for printers. The default method for
displaying the list of printers is by IP Address.
Clears the Available Printers list. This does not clear any
printer marked with the Permanent flag (P).
Flags the highlighted printers with an S. Only 30 printers can
be selected at one time. When the Windows Port List is
displayed during the process of adding or changing a printer,
only selected printers are listed.
Flags the highlighted printers with a P. These printers remain
in the Available Printers list even if the printers are physically
removed from the network or you click Clear.
5.2 Windows IP Peer-to-Peer Printing
Description
5-11