Setting Up Ip Peer-To-Peer - Ricoh fax3310l Basic Features

Type the following command and click OK:
3.
drive:\IP-P2P\SETUP.EXE
where drive specifies your CD drive.
4. Follow the instructions in the Setup program.
Note: If the Setup program detected a previous installation of the IP Peer-to-Peer
Redirector, the program asks whether to delete the old driver and continue the installa-
tion procedure. Click Yes or No.
Once the redirector is installed, each printer on the network that supports this peer-to-peer
capability appears as a Port under Printer Properties.

5.2.3 Setting Up IP Peer-to-Peer

IP Peer-to-Peer printing allows you to print to a network printer on networks without a file
server or on a network where you do not want to use the server for printing. You can use
peer-to-peer printing on Windows 95/98/Me or Windows NT 4.0.
To set up IP Peer-to-Peer printing, choose Start -> IP-P2P -> IP-P2P. The Peer-to-Peer
printing setup screen appears. The following table describes the fields in the setup screen.
Field or Button
Max Hops for
Search
Windows Peer-to-Peer Printing
The hop count determines how many networks the program
searches to find units. The default count is 2. An entry of 0
(zero) means the program searches only the network wire
directly connected to the workstation. An entry of 2 searches
the wire directly connected to the workstation and also
searches all networks accessible through two routers. Entries
of 15 or higher cause an automatic search of every connected
network. (This is not recommended due to the network traffic
it could generate.)
5.2 Windows IP Peer-to-Peer Printing
Description
5-7