Setting Up Lpr On Windows Nt Or Windows 2000 - Ricoh fax3310l Basic Features

7.2 Installing in a Windows Environment
To set up IP and lpr parameters:
Use Telnet to access the Network Interface Board.
1.
The default login and password are both sysadm.
Turn off the protocols you are not using (Option 3).
2.
3. Set up the subnet mask and default gateway for the Network Interface Board, if
applicable (Option 1).
4. Exit, save, and reset the Network Interface Board.
Alternatively, you can set up IP and
Board HTML pages with MAP or a Web browser (see Chapter 3, Monitoring the Network
Interface Board). The password to change parameters with the HTML pages is the same as
the Telnet password.

7.2.5 Setting Up lpr on Windows NT or Windows 2000

Choose Start -> Settings -> Printers.
1.
2. Click Add Printer.
The Add Printer wizard appears. Click Next to proceed.
3. On Windows NT:
— Choose the My Computer option and click Next.
— Click Add Port. A list of printer ports is displayed.
— Select LPR Port in the list of ports and click New Port. The Add LPR
On Windows 2000:
— Choose the Local Printer option and click Next.
— Choose Create a New Port and select LPR Port from the list.
— Click Next.
4. Specify the IP address of the Network Interface Board. For the name of the printer
or queue, specify
5. On Windows NT: In the list of available ports, put a checkmark next to the LPR
port you created and click Next.
Select the printer manufacturer and printer and click Next.
6.
Optionally, specify the printer name and click Next.
7.
8. You can choose the Shared option and select one or more operating systems that
will print to this printer. Click Next.
7-4
Compatible Printer window appears.
PORT1
parameters by accessing the Network Interface
lpr
(all uppercase, no space) and click OK.
TCP/IP Configuration