Selecting The Printer Port - Ricoh fax3310l Basic Features

- For manual installation -
- -
Follow these steps to install the software on your operating system (Windows
95/98/Me).
A Insert the CD-ROM into the CD-ROM drive.
B
Close all the applications that are currently running.
C Click [Start] on the taskbar, and click [Run].
D Type <Drive>:\IPX-P2P\SETUP.EXE (where <Drive> is your CD-ROM
drive name).
E Click [OK].
The [Welcome] dialog box appears.
The remaining steps are identical to G - I in the preceding procedure. ⇒ P.12 "In-
stalling IPX Peer-to-Peer"

Selecting the Printer Port

The Peer-to-peer printing software should be installed on each Windows 95/98/
Me PC that will use Peer-to-peer printing services.
A
Install the printer driver you want to use.
If the printer drivers have already been installed, you can go to the next step.
Important
❒ Using IPX Peer-to-Peer printing, confirm that the printer power is turned
on before continuing the following steps.
Reference
For more information about the printer drivers, see "Installing the PCL 6/5e
Printer Driver" or "Installing the PostScript Printer Driver" in "Printer Refer-
ence 1".
B
Click [Start] on the taskbar, point to [Settings], and then click [Printers].
The [Printers] window appears.
C
Click the icon of the printer you want to set for the Peer-to-peer printing.
D
On the [File] menu, click [Properties].
The Printer Properties appear.
E
Click the [Details] tab.
Using IPX Peer-to-Peer
2
13