Ricoh fax3310l Basic Features page 353

I
Select a printer you want to use.
TCP/IP
A Click the printer you want to use, and then click [OK].
Note
❒ Printers that respond to an IP broadcast from the computer will be dis-
played. To print to a printer not listed here, click [Specify Address], and
then type the IP address or host name.
❒ You cannot add an address partially similar to that already used. For ex-
ample, when "192.168.0.2" is already used, "192.168.0.2xx" cannot be
used. Similarly, when "192.168.0.20" is already used, "192.168.0.2" can-
not be used.
IPP
A Click [IPP].
The IPP setting dialog box appears.
B In [Printer URL], type "http://(printer's IP address)/printer" as the printer's
IP address.
(Example IP address is 192.168.15.16)
http://192.168.15.16/printer
C As necessary, type the names to distinguish the printer in [IPP Port Name].
Type a name differing from those of any existing port names.
If you omit this, the address typed in [Printer URL] will be set as the IPP port
name.
J
Click [OK].
K
Confirm that the selected port is highlighted, and then click [Next].
L
Click [Finish].
Note
❒ During installation, the [Digital Signature Not Found] dialog box may appear.
In this case, click [Yes] to continue the installation.
M
Restart the computer after the installation is complete.
N
Set up the options with the printer driver.
Reference
For more information about settings for options, see "Installing the Printer
Driver and Software" in "Printer Reference 1".
Note
❒ You can specify the "User Code" with the printer properties after installing
the printer driver. See the Help file for the printer driver.
Using SmartNetMonitor for Client
3
17