Setting Up A Client Computer; Windows 95/98/Me - Ricoh fax3310l Basic Features

Setting Up a Client Computer

This section describes how to set up a client computer when using a NetWare
print server.
After installing the printer driver, change the print port to NetWare queue.
Note
❒ This section assumes that the client has NetWare client applications installed
and is correctly configured to communicate with a NetWare print server. If
not, install the necessary applications before starting the setup procedure.

Windows 95/98/Me

Follow these steps to set up a Windows 95/98/Me client.
Preparation
Log on to the NetWare file server before starting the following procedure.
A
Install the printer driver you want to use as "Local printer".
Reference
For more information about installing the printer driver, see"Installing the
PCL 6/5e Printer Driver" and "Installing the PostScript Printer Driver" in
"Printer Reference 1".
Note
❒ Any port is selected during the installation, however, LPT1 is recommend-
ed.
B
Click [Start], point to [Settings], and then click [Printers].
C
In the [Printers] window, click the icon of the printer you want to use.
D
On the [File] menu, click [Properties].
E
Click the [Details] tab, and click [Add Port].
F
Click [Network] and click [Browse].
G
On the network tree, double-click the name of the file server.
The queues appear.
H
Click the queue you want to print, and click [OK].
I
Click [OK].
In the [Print to the following port] box, a network path to the printer appears.
J
Click [OK] to close the Printer Properties, and again, open it.
Setting Up a Client Computer
6
39