Starting The Machine; Shutting Down The Machine; Turning Off The Main Power - Ricoh AFICIO 1055 Operating Instructions Manual

Basics

Starting the Machine

A A A A
Press the operation switch to make the On indicator go on.
1
The display panel will come on.
Interrupt
Sample Copy
Start
top
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (less than 330 seconds), you can use the Auto
Start function. See ⇒ p.88 "Auto Start".
❒ You can set up a copy job and press the { { { { Start} } } } key while the "Select modes
and press the start key. Scanning originals can be started." message is dis-
played.
❒ When "Input user code, then press # ." is displayed, enter your user code.
See ⇒ p.87 "User Codes".

Shutting Down the Machine

A A A A
Press the operation switch to make the On indicator go off.

Turning Off the Main Power

A A A A
Turn off the main power switch.
The main power indicator of the control panel goes off.
22
On Main Power
TSPS010N