Gestetner F540 Operating Instructions Manual page 75

❒ When you transmit e-mail by the
Scanner function specifying a user
code, and the e-mail address is set
as the routing destination of the
specified user code, a Communica-
tion Result Report is sent after the
transmission is completed. This
makes it possible to verify the re-
sult of a transmission. See p.176
"Communication Result Report".
A A A A
Make sure the Memory Trans. in-
dicator is lit.
Note
❒ If the Memory Trans. indicator
is not lit, press the { { { { Memory
Trans.} } } } key.
B B B B
Make any settings for "Mail Op-
tions", if necessary.
Note
❒ Proceed to step
want to make any Mail Options
settings.
ZHMS300E
D
if you do not
Scanning a Monochrome Original
Using { { { { Trans. Option} } } } Key
A Press the { { { { Trans. Option} } } } key.
B Press the 0 0 0 0 or 1 1 1 1 key to dis-
play "10. Mail Options".
C Press the { { { { OK} } } } key.
Using the User Function Key
A Press the user function key
({ { { { F1} } } } to { { { { F10} } } } ) assigned to the
Mail Options function.
C C C C
Press 0 0 0 0 or 1 1 1 1 key to display the
item you want to set, and then
press the { { { { OK} } } } key.
3
ZHMS280E
ZHMS170E
69