Gestetner F540 Operating Instructions Manual page 48

Getting Started
E Press the 0 0 0 0 or 1 1 1 1 key to dis-
play "2. Available Size".
F Press the { { { { OK} } } } key.
G Enter the file size limit using
2
the number keys.
Note
❒ You can set a file size from 1
to 9999 KB.
H Press the { { { { OK} } } } key.
I Press the { { { { Cancel} } } } key.
The display returns to the Mail
Server settings menu.
Auth. E-Mail RX (Authorized E-
mail Reception)
This function is available on sys-
tems that allow routing of mail re-
c e i v e d v i a S M T P . S e e p . 9 4
" R o u t i n g M a i l R e c e i v e d v i a
SMTP".
When a limit address is set, mail
received from addresses that do
not match the limit address is dis-
carded, and an error message is re-
turned to the SMTP server.
The limit address is compared
with the addresses of mail origina-
tors, as illustrated by the following
examples.
When the limit address is set to
"@nic.fax.com":
abc@nic.fax.com - accepted
nic@fax.com - not accepted
abc@fax.com - not accepted
42
Note
❒ No Error Report is output even
when e-mail is discarded.
A Enter the e-mail address for
limiting routing.
Note
❒ You can enter up to 127 char-
acters.
❒ If you make a mistake, press
the 0 or 1 key to move the
display cursor, and then
press { { { { Clear/Stop} } } } key to try
again.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
Scanner Server
Enter the IP address of the delivery
server to transmit the scanned doc-
uments.
Note
❒ "Scanner Server" only appears
on the display when ScanRout-
er V2 Lite is selected with user
parameters or ScanRouter V2
Professional is set up by the ser-
vice representative. See p.166
"User Parameters"(switch 16,
bit 2).
A Enter the IP address or domain
name of the server.