Gestetner F540 Operating Instructions Manual page 45

POP Server
Enter the IP address of the POP
server.
The POP server is the server that
receives e-mail over the Internet.
If you use IMAP4 server, specify
the IMAP4 address in the follow-
ing procedure. Also, you need to
set IMAP4 with user parameters.
S e e p . 1 6 6 " U s e r
ters"(switch 17, bit 6).
Consult your systems administra-
tor if you are unsure about this set-
ting.
A Enter the POP server address
using the number keys.
Note
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
❒ The POP server can also be
specified as a domain. In this
case, you must specify the
DNS server address before-
hand.
❒ You can enter up to 127 char-
acters for a domain.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
Mail Address
Enter the mail address of NIC
FAX.
Consult your systems administra-
tor if you are unsure about this set-
ting.
A Enter the mail address.
P a r a m e -
B Press the { { { { OK} } } } key.
Account Name
Enter the account name to be used
for connection to the POP server.
Consult your systems administra-
tor if you are unsure about this set-
ting.
A Enter the account name.
B Press the { { { { OK} } } } key.
NIC FAX Initial Settings
Note
❒ You can enter up to 127 char-
acters for a mail address.
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
The display returns to the Mail
Server settings menu.
Note
❒ You can enter up to 31 char-
acters for an account name.
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
The display returns to the Mail
Server settings menu.
2
39