Table of Contents
Advertisement
❖ ❖ ❖ ❖ User Parameter List
Switch
Bit
16
1,0
Leave messages on POP
server after receiving
them.
2
Use ScanRouter V2 Lite
3
If an error occurs during
e-mail reception, send
the Error Mail Notifica-
tion to the sender.
4
Receive e-mail while the
Night Timer is activated.
5
Condition for forward-
ing received documents
to the ScanRouter V2
Professional server
Item
00: No
01: Save all
10: Save only errors
Important
❒ If you select "Save all" or
"Save errors," periodically
check your e-mail from a
computer to remove mes-
sages from the POP server.
Limitation
❒ You may not be able to save
e-mail depending on the
type of POP server.
0: No
1: Yes
Limitation
❒ If you select "Yes," the fol-
lowing limitations are ap-
plied to the fax features:
• Destinations such as
• Some Reception features
0: Yes
1: No
0: Yes
1: No
0: Forward all documents
1: Only forward documents
with Fax Delivering IDs
Settings
"#001" or "#002" cannot
be specified as e-mail
addresses because they
are recognized as desti-
nations programmed in
the delivery server.
are not available.
User Parameters
Reference
⇒ p.88
⇒ p.14
⇒ p.19
⇒ p.172
⇒ p.88
⇒ p.124
167
10
Advertisement
Table of Contents
