Routing Mail Received Via Smtp - Gestetner F540 Operating Instructions Manual

Using Internet Fax Functions

Routing Mail Received via SMTP

Mail received via SMTP can be routed to other fax machines. It can also be rout-
ed to destinations registered as Quick Dial entries, Speed Dial entries, or Groups.
4
Preparation
Before routing mail received via SMTP, you first must set "Route documents
received with SMTP" to "Yes" with user parameters . See p.166 "User Param-
eters" (switch 17, bit 1).
Note
❒ If a mail transfer request is received when the "Route documents received
with SMTP" with user parameters is set to "No," NIC FAX responds with an
error message to the SMTP server.
❒ You can make settings that limit transfer to specified originators. See p.42
"Auth. E-Mail RX (Authorized E-mail Reception)".
❒ Using this function, you can also send documents from your e-mail software
to e-mail addresses and G3 fax machines' destinations through NIC FAX si-
multaneously. For details about specifying the destinations of fax machines,
see the following.
94
GFRECP4E