If the Network Transmission Auto
Check Function Is Turned Off
If the Network Transmission Auto
Check function is set to "Off" with
user parameters, select "Mail Ad-
dress" in the display that appears.
For information about changing
this setting, see p.166 "User Pa-
rameters" (switch 32, bit 1).
A Confirm "1. Mail Address" ap-
pears, and then press the { { { { OK} } } }
key.
H H H H
Enter the e-mail address you want
to register.
When the Network Transmission
Auto Check Function set to On:
When the Network Transmission
Auto Check Function set to Off:
Note
❒ You can enter up to 127 charac-
ters for an e-mail address.
❒ You can enter "." and "@" using
a Quick Dial key. Press the
{ { { { Symbols} } } } key to enter symbols.
You can shift between upper
and lower case by pressing the
{ { { { ABC/abc} } } } key.
❒ To enter texts registered in
"Template: Address", press the
{ { { { #} } } } key, press the 0 or 1 key
to display the desired text, and
then press the { { { { OK} } } } key. See
p.147 "Registering Template
Addresses".
Registering Addresses for Internet Faxing
❒ If you incorrectly enter charac-
ters, press the { { { { Clear/Stop} } } } key,
and then enter the correct char-
acters.
I I I I
Press the { { { { OK} } } } key.
J J J J
Press the { { { { OK} } } } key.
K K K K
Enter the name of the receiver.
Note
❒ To edit the currently registered
name, press the { { { { Clear/Stop} } } } key
to delete the name shown, and
then enter the new name.
L L L L
Press the { { { { OK} } } } key.
M M M M
Press the 0 0 0 0 or 1 1 1 1 key to select
"On" or "Off".
Note
❒ If you set the Label Insertion
function to "On", documents are
t r a n s m i t t e d b y S e q u e n t i a l
Broadcasting.
Reference
p.79 "When using NIC FAX
with Broadcasting and Sequen-
tial Broadcasting"
Chapter 3 "Label Insertion", Ad-
vanced Features
N N N N
Press the { { { { OK} } } } key.
8
139