Table of Contents
Advertisement
Getting Started
❖ ❖ ❖ ❖ Network Boot
Network boot automatically acquires information related to network settings
from the network's DHCP server. Setting Network Boot to "DHCP" activates
the Network Boot function. See p.37 "Network Boot".
You do not need to set that information on the machine. You can acquire the
following information from the DHCP server:
Acquired information
2
• IP Address
• Subnet Mask
• Gateway Address
• Domain Name
• DNS Address 1
• DNS Address 2
• WINS Addr.
• SMTP Server
• POP Server
Note
❒ Servers that have been confirmed to work as DHCP server are Windows
NT Server 4.0, and Windows 2000 Server.
❒ DHCP (Dynamic Host Configuration Protocol) automatically assigns IP
addresses and other necessary settings to devices on the network.
❒ To use a DHCP server, the DHCP server (or DHCP relay agent) has to be
installed on the same subnet.
❒ If the DHCP server cannot assign an IP address, an IP address that is not
used on network and begins with "169.254", is automatically selected and
used. Then, the NIC FAX periodically accesses the DHCP server to acquire
an IP address, and when successful, the IP address is changed to the new
one. This is called AutoNet function. While the AutoNet function runs,
neither of the Scanner function, Internet Fax function, IP-Fax function and
LAN-Fax function can be used.
❒ When Network Boot is set to "DHCP" and the NIC FAX runs, the IP ad-
dress of the NIC FAX may be changed. To maintain the DHCP server-as-
signed IP address, do one of the following:
• Reserve the NIC FAX IP address (MAC address) you want to use on the
DHCP server, so the fixed address is allocated to NIC FAX.
• Lease the IP address for an indefinite time.
32
Descriptions
Even if you specify these on
the machine, information ac-
quired from the DHCP server
is valid.
If you specify these on the
machine, they are valid. If
you do not, information ac-
quired from the DHCP server
is valid.
Note
• On the Network setting
display, the values you
specify on the machine al-
ways appear.
• The User Parameter List
shows both the values you
specify on the machine
and those the DHCP serv-
er acquires. See Chapter 7
"How to Set the User Pa-
rameters - Printing User
Parameter List", Advanced
Features.
• You can check currently-
valid ones only among
values the DHCP server
acquires using the Web
browser. See p.153 "Mak-
ing Settings through a
Web Browser".
Advertisement
Table of Contents
