Gestetner F540 Operating Instructions Manual page 150

Registering Addresses
D Press the { { { { OK} } } } key.
Using an Alias Fax Number
without VoIP Gateway
To use an alias fax number, you
need to select "Yes" with user pa-
rameters for gatekeeper IP-Fax
transmission. See p.166 "User Pa-
rameters" (switch 32, bit 0). You
also need to register the gatekeep-
er address and alias fax number
with IP-Fax Parameter settings.
See p.44 "IP-Fax Parameter Set-
tings".
A Enter the alias fax number us-
ing the number keys.
When the Network Transmis-
sion Auto Check function is set
to "On":
8
When the Network Transmis-
sion Auto Check function is set
to "Off":
B Press the { { { { OK} } } } key.
C Press the 0 0 0 0 or 1 1 1 1 key to select
"2. IP-Fax Address".
Note
❒ If the Network Transmission
A u t o C h e c k f u n c t i o n i s
turned off, the display does
not appear. Proceed to step
E. See p.166 "User Parame-
ters" (switch 32, bit 1).
144
D Press the { { { { OK} } } } key.
E Press the 0 0 0 0 or 1 1 1 1 key to select
"No".
F Press the { { { { OK} } } } key.
Using VoIP Gateway
If you use the VoIP gateway, docu-
ments are transmitted to a G3 fax
machine connected to public tele-
phone line via the VoIP gateway.
A Enter the G3 fax number of the
receiver using the number
keys.
Note
❒ To use the gatekeeper, you
need to select "Yes" with user
parameters for gatekeeper
IP-Fax transmission. See
p.166 "User Parameters"
(switch 32, bit 0).
❒ You also need to register the
gatekeeper address and alias
fax number with IP-Fax Pa-
rameter settings. See p.44
"IP-Fax Parameter Settings".
B Press the { { { { OK} } } } key.
C Press the 0 0 0 0 or 1 1 1 1 key to select
"2. IP-Fax Address".