Table of Contents
Advertisement
Getting Started
Password
Enter the login password to be
used for connection to the POP
server.
Consult your systems administra-
tor if you are unsure about this set-
2
ting.
A Enter the password.
Note
❒ You can enter up to 31 char-
acters for a password.
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
Mail RX Interval (Mail Reception
Interval)
When using the Auto Mail Recep-
tion function, enter the interval in
minutes at which NIC FAX is to
automatically check for mail.
A Enter the interval for automatic
reception using the number
keys.
Note
❒ You can enter a value be-
tween 1 and 60 minutes in
one-minute increments.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
40
Time Zone
Enter the time difference between
your time zone and Greenwich
Mean Time.
A Press the 0 0 0 0 or 1 1 1 1 key to adjust
the time difference.
Note
❒ The time zone set up in this
step appears on the mail
header information, thus if
the setting is not done cor-
rectly, the receivers will not
get the correct reception time
either.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
Mail to Admin. (Mail to
Administrator)
Make this setting when you want
Error Mail Notifications to be sent
to another address, in addition to
the originator.
NIC FAX sends an Error Mail No-
tification and a Transfer Request
Notification to the sender and a
copy (CC) to the address specified
with this setting.
You can also have the Journal sent
to address specified with this set-
ting. For more details about the
setting, see p.80 "Transmitting
Journal by E-mail".
A Enter the address to which no-
tification will be sent if an er-
ror occurs.
Advertisement
Table of Contents
