Omron E5AK User Manual page 75

• Process value
Scaling lower limit -10%FS to scaling upper limit +10%FS
Comment
During temperature input, the range of the currently selected sensor is taken as
the monitor range.
• Set point
Local SP : Local SP lower limit to local SP setting upper limit
Remote SP: Remote SP lower limit to remote SP upper limit
F Related article
3.7 Adjusting Control Operation (page 3-14)
F Related parameters
See
"Input type" "Scaling upper limit" "Scaling lower limit" "Decimal point" (setup
mode)
"SP setting upper limit" "SP setting lower limit" (expansion mode)
"SP mode" (level 2 mode)
"Remote SP enable" "Remote SP upper limit" "Remote SP lower limit" (option
mode)
Remote SP monitor
• Monitors remote SP in the local SP mode.
Function
Remote SP lower limit to Remote SP upper limit
Monitor
F Related article
4.2 Operating Condition Restrictions/SP ramp (page 4-6)
F Related parameters
See
"SP mode" (level 2 mode)
"Remote SP enable" "Remote SP lower limit" "Remote SP upper limit" (option
mode)
Monitor Range
Setting Range/Monitor Range
Monitor Range
Level 0 Mode Level 0 Mode
Unit
EU
Unit
EU
EU
Conditions of Use
The controller must be in the local SP
mode with the remote SP function
enabled.
Unit
EU
Default
0
-
5--7