Setting Up The Option Unit - Omron E5AK User Manual

CHAPTER 2 PREPARATIONS
J Setting up the option unit
F Before setup
F Procedure
2--4
• Check the type of the option unit you are about to set up.
• For details on types of option unit and main specifications, see Appen-
dix, Model List (page A-11) and Appendix, Option Unit Ratings and
Characteristics (page A-4).
• For details on the relationship between units and terminals, see page
2-8.
(1) Remove the power board and option boards in the order shown in
the following diagram.
1
(2) Insert the option units into the sockets for options 1 to 3. The fol-
lowing diagram shows the relationship between option units and
mounting positions.
Option 2
E53--AKF: Transfer output
(3) Mount the option boards and the power board in the order shown.
2
Option 1
E53--AKB: Event inputs 1/2
E53--AK01: RS--232C
E53--AK02: RS--422
E53--AK03: RS--485
Option 3
E53--AKB: Event inputs 3/4