Omron E5AK User Manual page 68

CHAPTER 4 APPLIED OPERATION
Parameters
4--18
• If "input type", "scaling upper/lower limit", "SP limitter upper/lower
limit", or "_C/_F selection" parameters is changed when "set point",
"set point during SP ramp", or "process value" parameter is selected,
each of the "transfer output upper limit" and "transfer output lower
limit" parameters are forcibly changed to their respective upper or
lower limit values.
Change value
Limitter upper limit
change value
Limitter upper/lower limit values
Transfer type scaling upper/lower limit values
Symbol Parameter Name: Mode
Transfer output type
Transfer output upper limit
Transfer output lower limit
SP limitter
Transfer type scaling range
B
: Option Transfer output designation
: Option Transfer output scaling
: Option Transfer output scaling
A
Set point
Change upper limit
value A to B.
Set point
Application