Omron E5AK User Manual page 114

CHAPTER 5 PARAMETERS
Calibration Mode
• The parameters in this mode can be used only when the "security" parameter
(protect mode) is set to "0". When selecting this mode for the first time after the
E5AK has left the factory, return the "security" parameter to "0".
• This mode contains the parameters for user calibration of inputs and outputs.
Only parameters relating to input types specified in the "input type" parameter
(setup mode) can be used. Also, related output parameters can be used only when
the communications unit (E53-AKF) is added on.
• To select this mode when in the levels 0 to 2, setup, expansion and option modes,
press the
play. If you select [
cond minimum, the controller enters the calibration mode.
• For details on parameters in the calibration mode, see Chapter 7 Calibration.
5--46
key for 1 second minimum. The display changes to the menu dis-
] using the key then press the key for 1 se-