Transistor Output Units
Dimensions
4-4-10 GT1-OD32ML-1 Transistor Output Unit with High-density
Connector (PNP)
Output Specifications
Components
I/O Unit Interface
Communications Connector 1
(on the Communications Unit side)
110
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Item
Number of outputs
Current per common
(Refer to page 200.)
TS Indicator
Output Indicators
Display the status of the outputs.
Lit when an output is ON.
Terminal Block
32 points
With connectors:
With terminal block: 4 A max.
DIN Track Mounting Hook
Approx. 70
60
Specifications
2 A max.
I/O Unit Interface
Communications Connector 2
(on the Terminator side)
High-density Digital Output Connector
(made by FUJITSU)
Connects to the output devices, such as
relays and solenoids, via an I/O Block or a
Connector-Terminal Block Conversion Unit.
Section 4-4
(Unit: mm)
87