Multiple I/O Terminal; Overview; System Configuration - Omron DEVICENET#05-2003 Operation Manual

MULTIPLE I/O TERMINAL

1-1 MULTIPLE I/O TERMINAL
1-1-1

Overview

1-1-2

System Configuration

2
A MULTIPLE I/O TERMINAL is a building-block DeviceNet Slave that consists
of a Communications Unit that interfaces one or more I/O Units. The I/O Unit
interface supports up to 8 I/O Units and a total of up to 1,024 I/O points. I/O
Units are connected using simple snap-on connections via I/O Unit Connect-
ing Cables. Allocation and address settings on the I/O Unit interface are not
required, enabling simple, flexible distributed I/O control.
DeviceNet Master Unit
I/O Unit Connecting Cable
Communications
Unit
I/O Unit interface
Maximum of 8 Units; total length: 3 m, 1 m max. between Units
Total number of points (inputs + outputs): 1,024 points
The total number of points must be within the maximum number
supported by the Master.
Example: With C200HW-DRM21-V1 Master, 512 inputs/512 outputs
DeviceNet Network
I/O Units
Section 1-1