Omron DEVICENET#05-2003 Operation Manual page 189

GT1-CT01 Counter Unit
External output 1 (OUT1)
Output conditions:
Present value Set value 1
External output 2 (OUT2)
Output conditions:
Present value Set value 2
Setting and Reading the
Count Value and Set
Values
2. The count values and set values can be set in BCD or hexadecimal.
Count value
Set value 1
Set value 2
Count start
Count value setting refers to the procedure required to change the present
value of the count as required, whereas count value reset refers to the pro-
cess required to reset the present count value to 0.
Count Value Reset
The count value can be reset using combinations of the following 3 inputs.
Encoder input Z
External input
The internal Reset Bit (bit 07 in word n+2 of the output area)
Section 5-4
Counting stopped
due to overflow
Reset
Time
179