Gt1-Id16Ml-1 Transistor Input Unit With Connector (Pnp) - Omron DEVICENET#05-2003 Operation Manual

Transistor Input Units
Dimensions
4-3-6

GT1-ID16ML-1 Transistor Input Unit with Connector (PNP)

Input Specifications
Components
I/O Unit Interface
Communications Connector 1
(on the Communications Unit side)
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Number of input points
Number of points that can be ON simultaneously
Note The number of input points that can be ON simultaneously depends
on the ambient temperature, as shown below.
Max. No. of input points
TS Indicator (Refer to page 200.)
Terminal Block
Approx. 59
Item
Input Indicators
Display the status of the inputs.
Lit when an input is ON.
I/O Unit Interface
Communications Connector 2
(on the terminator side)
Digital Input Connector
(made by FUJITSU)
Connects to input devices, such as
switches and sensors, via an I/O Block
or a Connector-Terminal Block
Conversion Unit.
DIN Track Mounting Hook
Section 4-3
(Unit: mm)
Specifications
16 points
16 points max.
Ambient temperature ( C)
55